/ 10
6
IL SISTEMA DI GONFIAGGIO
IL GONFIATORE HP (fornito con manometro di controllo)
A
B
In posizione A: (Lasciare inserito
il tappo)
Il gonfiatore ha una portata
massima con una pressione bassa:
in questa posizione si gonfiano
rapidamente tutti gli elementi
In posizione B: (rimuove il tappo)
Il
gonfiatore ha una portata inferiore
rispetto alla posizione A, ma
consente di raggiungere una
pressione superiore
In posizione C:
per sgonfiare.
Innestare il tubo come indicato nella
fig. C e pompare normalmente.
C
LE VALVOLE STANDARD
(
1
) tappo (
2
) supporto valvola (
3
) base tubo
Per attivare le valvole standard in posizione di
gonfiaggio
:
•
Togliere il supporto valvola dalla sua protezione
•
Svitare il tappo della valvola
•
Avvitare il supporto della valvola sulla base
(serrarlo con decisione per evitare di rovinare la
filettatura) e verificare che il tappo sia sempre
accessibile
Per sgonfiare:
Svitare il supporto della valvola della base
1
2
3
LE VALVOLE EASY PUSH
Per attivare le valvole easy push :
Per modificare la posizione
In posizione di gonfiaggio
In posizione di sgonfiaggio
Spingere
La membrana è chiusa, il pulsante è in
posizione sollevata
La membrana è aperta, il pulsante è
in posizione abbassata
NOTA:
EVITARE DI FORZARE: PER NON DANNEGGIARE IL SISTEMA DI
GONFIAGGIO INTERNO DELLA VALVOLA