background image

Start / Stop Cleaning and Adjust 

Cleaning Time

The factory default cleaning mode is SMART 

Cycle (Floor, Wall, Waterline). 

Cycle calculates a customized cleaning time 

optimized for your pool. On the first run of SMART 

Cycle, the control box counts up from zero as it 

calculates the optimized cleaning time.  

On periodic SMART Cycle cleaning, the control 

box will count down from the optimized cleaning 

time.

To recalculate the SMART Cycle setting, press 

and hold the 

 button for 5 seconds.

 

Use 

 to change cleaning surface setting.

Toggle between:  

*

 

Waterline Only 

 

 

(45 min)

 

Quick Clean 

 

 

(1h 15 min) Floor only

  SMART Cycle 

 

 

(calculates custom cleaning duration) 

 

 

Floor, Wall, Waterline

 

  Deep Clean  

 

(2h 45 min) 

 

 

Floor, Walls, Waterline, High Intensity

*Available on EX6050 iQ only.

With the cleaner submerged in the water, 

 

press 

  to begin operation.

Press again to interrupt and cancel an in-progress 

cleaning cycle.

NOTE

:   The control box automatically goes into standby 

mode after 5 minutes and the display screen turns 

off. Press any key to exit standby mode and view 

remaining cycle time. Cleaner will continue to 

function in standby mode.

Press +/- buttons to increase or decrease cleaning 

time in 15-minute increments.

- Minimum run time is 30 minutes

 

- Maximum run time is 3 hours 30 minutes

Lift System

The Lift System is designed to assist in retrieving 

the robot from the pool.  Lift System can be 

activated at any time during or after a cleaning 

cycle.

1.  Press 

 to begin the automated 

procedure.  

 

The screen displays 

 when the 

Lift System is in operation.  

 

NOTE

:  To stop the procedure at any time, press and 

release the button again.

2.  Next, Press and HOLD 

 to rotate the 

cleaner.

3.  Once the cleaner is facing the wall of your 

choice for retrieval, release the button.

4.  Cleaner will drive forward and up the wall it 

is facing.  It will wait at the water line to be 

retrieved.

5.  When in reach, remove the cleaner from 

the pool using the handle. The cleaner 

will quickly expel water to allow for lighter, 

easier removal.

NOTE

: Never lift the cleaner out of the pool by the floating 

cable.

Page

 12 

  

 

Zodiac

®

 EvoluX

 iQ Robotic Pool Cleaner   

|

   Owner's Manual

Содержание EvoluX iQ





























Отзывы: