User Issue
Possible Cause
Suggested Solution
The cleaner is not cleaning
the pool effectively.
Filter canister is full or dirty.
Dispose of debris and thoroughly clean the filter
canister with mild soap and a soft brush. Then,
re-submerge the cleaner (see:
Clean the Filter
Canister
).
Brushes are worn.
Check the wear indicator(s). Contact your local
dealer for spare parts.
Cable is excessively tangled.
Untangle the twisted cord and lay in sun to
reduce memory. (See:
Cord Tangling
).
Pool temperature reading
from the cleaner (certain
models only) is different to
the temperature reading
shown in the iAquaLink app
or other equipment.
The cleaner reading is taken from the
bottom of the pool. Deeper water will
be colder than at the waterline.
Take an average of the two readings to
approximate current pool water temperature.
Dismissing an Error Code
From the Control Unit:
After you have completed the troubleshooting solution steps, press any key (except the phone icon) to
clear the error code.
If the control unit is in Standby Mode, press the Start/Stop button to show the on-screen display. After
you have completed the troubleshooting solution steps, press any key (except the phone icon) to clear
the error code.
From the iAquaLink
™
App:
Press the error icon to display troubleshooting solutions. After you have completed the troubleshooting
solution steps, press
Clear Error
to return to normal operation. Or, press
OK
if you need to complete the
solution steps at a later time.
iAquaLink Troubleshooting
This information can help to troubleshoot connection and setup challenges between the iAquaLink app
and the cleaner.
How It Works
Your
Smart
Device
Your
Internet
Router
Cleaner
Control
Unit
Robotic
Pool
Cleaner
Internet
Page
24
Zodiac
®
EvoluX
™
iQ Robotic Pool Cleaner
|
Owner's Manual