6
1.3 I How it works
The cleaner is independent of the filtration system and can therefore operate autonomously. It just simply needs to be
conected to the mains power supply.
It finds the best route to move around and clean the areas of the pool for witch it has been designed (depending on the
model/ bottom, walls, water lin). Debris is sucked in and stored in the cleaner's filter.
The control box enables the cleaning operations to be started, selected and programmed (depending on the model).
The cleaner has four main units :
• A
cleaning device
containing the suction pump, traction motors, the debris filter, can be washed after use.
• A
control box
containing the electronic elements and the safety transformer, which must be placed at least 3,5m from
the water (norm NFC15/100).
• A
remote control
allowing the control of the robot in manual mode.
• A
caddy kit
allowing the appliance to be moved from its storage location to its start-up location.
3.5 meters Minimum
: Control box
: Caddy
: Robot
: Flotting cable
: Power outlet
: Power cable
: Remote control
1.4 I Pool preparation
• This product is intended to be used in pool which are permanently installed. Do not use it in
pools which may be dismantled. A permanent pool is built into the ground or on the ground
and cannot be easily dismantled and stored.
• This cleaner is not designed to be used in sulphurous water.
•
The appliance must function in pool water of the following quality :
Temperature of water
At 10°C and 35°C
pH
At 7,0 and 7,8
Chlorine
At 0,6 and 4 ppm
Salinity level (NaCl) maximum
5000 ppm
EN
