![background image](http://html1.mh-extra.com/html/zodiac/aqualink-z4/aqualink-z4_owners-manual_3955076027.webp)
AquaLink
®
Z4 | Owner’s Manual
AquaLink
®
Z4 | Owner’s Manual
AquaLink
®
Z4 | Owner’s Manual
AquaLink
®
Z4 | Owner’s Manual
ENGLISH
Page 27
SPA WILL TURN OFF AFTER COOL DOWN CYCLE
In order to prevent equipment damage, whenever the system is in Spa Mode,
any change (such as switching to Pool Mode) may be delayed for up to five (5)
minutes. After the heater has stopped firing and water has circulated through
it for at least five (5) minutes - preventing equipment damage - the system will
allow the Spa Mode to be turned off.
TIMEOUT MODE
TIME OUT mode is used by the pool service person to aid them in servicing the
pool. The AquaLink Z4
®
user interface will not be functional for three (3) hours,
or until the switch at the Controller is turned back to AUTO mode. The time
remaining for TIME OUT mode is displayed on the user interface screen.
SPILLOVER DISABLED WHILE SPA IS ON
This message is displayed when the spa spillover is pressed while in spa mode
(water circulation is to spa). The spillover requires that water circulation is to pool
in order to operate. The spillover will activate when the system switches back to
pool mode.