BASiC PROgRAMMiNg: To set a particular piece of equipment to turn on and off at a predetermined time, touch the MENU button to display
the MENU screen. From the MENU screen, select SCHEDULE to display SCHEDULE screen. To add equipment to a schedule, press NEw>SCHEDULE
DEviCE. Select equipment you want to program from list, then press SELECT to return to SCHEDULE screen. The SCHEDULE screen displays
programmed equipment, on/off times, and days of the week scheduled. To set/change program, touch circuit (equipment) name, select on/off
times, day/weekdays/weekends and press SAvE to save changes. Repeat this process for each piece of equipment that you wish to program. You
may enter an unlimited amount of scheduled programs for each piece of equipment.
SET DATE/TiME: Touch MENU>SET DATE/TiME. Press DATE or TiME field to select. Use keypad to change DATE or TiME, press ENTER to save
changes. Use Navigation bar buttons to exit/select next task.
LABEL AUxiLiARY FUNCTiONS: Touch MENU>SYSTEM SETUP>LABEL AUx. Select the AUx from list to label. Touch gENERAL, LigHT or
wATERFALL buttons to select common labels, or create your own CUSTOM label. Repeat for all auxiliary features.
Note 1: The labels “AiR BLOwER” and “FiLL LiNE” are 30 minute timed cycles.
Note 2: if DiP switches 1, 2, or 3 are on, Auxiliaries 1, 2 and 3 are labeled CLEANER, LOw SPEED and SPiLLOvER (pool/spa combo systems only)
cannot be relabeled.
SET TEMPERATURE: Touch MENU>SET TEMP. Select POOL HEAT or SPA HEAT button, use keypad to enter temperature and press ENTER to save
changes. Use Navigation bar buttons to exit/select next task.
AquaLink
®
Touch
TM
Programming & System Defaults
Default Temperature Settings
Default OneTouch Settings
Default Freeze Protection Settings
Default Pool Temp.
80°F
Default Spa Temp.
102°F
Default Temp. 1*
80°F
Default Temp. 2*
60°F
*Pool only / Spa only systems
Btn 1 - SPA MODE
Btn 2 - CLEAN MODE
Btn 3- ALL OFF
Btn 4-6 - NOT ASSigNED
You can reprogram/add settings to
TOUCH buttons under MENU > SYSTEM
SETUP > TOUCH SETUP.
Filter Pump: Freeze Protection ON.
All other Equipment: Freeze Protection OFF.
NOTE: if you selected Spa to be freeze protected,
water circulation will switch between pool and spa
every 30 minutes during freezing conditions once
freeze mode is active.
Zodiac Pool Systems, inc.
6000 Condor Dr., Moorpark, CA USA 93021
P 800.822.7933 | F 877.327.4103
©Zodiac Pool Systems, inc. All rights reserved.
H0347200- 1010
FOR YOUR SAFETY - To Avoid property damage, injury, or death, be sure to read the Safety warnings and
important Safety instructions in the AquaLink Touch Owner’s Manual.
