Manual Zocon Z300 Seed drill
10. SENSOR CONTROL
Before using your captor system, please calculate you flow according to the right table sets.
Put on the both switches flow
and fane and begin driving at
constant speed.
Calculate with the
table sets your flow
and indicate it with the
right number on the
potentiometer.
After few meters
driving at constant
speed, press the
« vitesse memorisee »
switch to record it, the
green light should
work.
If any problem appears
during the spreading, the red
light will work, then
please make the necessary
check.
At the end of the field, to
fill your tubes with seeds
use the switch
« amorçage » during
sufficient time.
Der Fahrzeuggeschwindigkeitssensor
sollte in einem Abstand von 0,5 bis 1 cm
des Rades montiert werden
