ZNTS WF320348AAB, Руководство по сборке, Страница: 2 / 22

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
the following pages.
plastic bags and separate them
• Make sure you have enough
space to layout the parts before
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners. • This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Handy Hints
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
• Assemble the item as close
room) as possible.
• To reduce the likelihood
of damage to your product,
make sure your power drill
is set to a low torque setting.
WARNING
In order to help prevent overturning –
To help prevent product toppling over please follow the below steps:-
Do not open more than one drawer at a time
Do not place heavy items in the top drawers
Do not place heavy items on top of the furniture, unless the furniture has been
designed for this purpose
You will need to provide wall plugs and screws applicable for your wall type
1
• Remove all fittings from the
to its final position (in the same
please follow these instructions
Do not allow children to climb or hang on the furniture
Use the anti tip stap or wall fixing method provided (if applicable)
please note that only the anti tip strap is provided.
• Keep children and pets away from
the installation area, which may cause
choking if small parts are swallowed.
• Do not stand or apply weight to
the product during assembly.
This may cause damage.
• Assemble on a soft level
surface to avoid damage
to the unit or floor.
• It's easier for two people to assemble
the parts together.
• Check for loose screws on
this unit from time to time.
• Regularly check and ensure
that all bolts and fittings are
correctly tightened.