ZNEX Notstrom, Руководство пользователя

Страница: 3 / 12

Opening the cap Connecting the charging
cable
Connect the supplied micro-USB cable with the
input. Now you can charge notstrøm in any
USB-interface (PC/MAC, USB power adapter*,
car, solar panel).
Note:
Don’t forget to screw on
the protective cap again
after charging.
60 - 80 %
LED blinks LED constantly
LED display
0 - 20 %
20 - 40 %
40 - 60 %
80 - 100 %
100 %
Note:
During charging, you switch off or on the
LEDs anytime with a single click (see stealth
mode).
Unscrew the rear
protective cap
How to charge notstrøm
Warning:
Screw on the protective cap again after
charging everytime. Only in this way, the
electronics can be prevented from being
damaged irreversibly by water, moisture or
dirt particles.
*USB power adapter is
not included in the
scope of the delivery
During charging, the LEDs blink and display
the current state of charge. If all LEDs
constantly illuminate, notstrøm is then
charged.
EN