ZMIO310 Vertical Bus Expansion Module User Manual V1.0
Whether the controller is subjected to
vibration or shock
Should be within the range of
vibration resistance and
impact resistance
Is the heat dissipation good
Keep good ventilation and
heat dissipation
Installation and
Wiring Status
Whether the basic unit and the
expansion unit are installed firmly
The mounting screws should
be
tightened
without
loosening
Whether the connecting cables of the
basic unit and the expansion unit are
fully inserted
The connection cable cannot
be loosened
Are the screws of the external wiring
loose
Screws should be tightened
without loosening
Whether the cable is damaged, aged,
cracked
The cable must not have any
abnormal appearance
7.2.
Common Problems
Problems
Suggestions
No signal comes to the
input.
1.
Check whether the limit sensor works normally, and
whether the "input" view can watch the signal change of
the limit sensor.
2.
Check whether the mapping of the limit switch is
correct.
3.
Check whether the limit sensor is connected to the
public end of the controller.
Ethernet can’t
connect
1.
Check whether the led of Ethernet is ON or not.
2.
Check whether the network cable suits the
requirements.
3.
Check whether the correct ethernet port is inserted.
The output does not
work.
1.
Check whether IO power is needed.
2.
Check whether the output No. is consistent with
operated one.
No voltage and current 1.
Check whether IO power is needed.
