ZHD500X Handheld Box Manual Version1.0
6
1.2 Hardware Introduction
There are peripherals of ZHD500X:
1. Emergency stop
2. Selection switch (3 positions)
3. Enable button (it needs to evaluate the equipment)
4. Pat pasting button
5. Rotation encoder
6. Indicator light
7. 10.1inch TFT display screen
8. Touch screen
9. Stylus
1.2.1 Emergency Stop
The stop button is internally coded, which cannot be directly connected to the machine.
This button is pressed, a corresponding key value will be sent. (See page 7, physical
key coding table).
The stop button can’t replace other safety equipment.
Stop button on teach pendant can’t replace emergency stop button on machine.
Please check stop button before use, it is not damaged, which means it can be
used normally.
