5
*Connect to the Alarm Input and Output Devices
The alarm input device should be the type of GND connected alarm or voltage input alarm, which can be set
as N/O. or N/C.
The requirements of voltage alarm signal input level: low level: 0-2V; high level: 5-15V.
The green angle pins are supplied for access of PTZ and alarm devices. Wiring steps are as below:
(1) Pull out the angle pins that inserted in the alarm input and output interfaces;
(2) Unscrew the screws using micro Philips screwdriver, insert the signal cable into interface under spring,
and then tighten the screws;
(3) Plug in the connected pins into green angle pin socket.
*Connect to the Video Output Device: VGA Monitor
