ZMODO ZM-KW1001-1TB, Быстрый старт

Страница: 11 / 15

10
Unplug and power off the cameras that have been
configured in Section 3.
1
Line the camera bracket against the wall where you
would like to install the cameras, and mark the
appropriate holes. Drill three holes slightly smaller than
the wall anchors and use a hammer to gently insert the
anchors into the wall. Fasten the three screws through
the holes on the bracket and into the anchors as shown.
Note:
Depending on the camera model that you purchased, the camera
bracket may or may not be fastened onto the camera when first removed
from factory packaging.
2
(image may vary for your specific camera model)
If you have a lot of obstacles between your camera and
the WiFi router, the transmission range will be greatly
reduced. In order to increase the range, you may
purchase a WiFi range extender to place near the
cameras. Please visit
for other www.zmodo.com/support
tips on improving your WiFi signal range.