ZMODO Greet Universal, Быстрый старт, Страница: 6 / 20

Remove the mounting bracket from your chime. Take your
Indoor Chime out of the packaging and slide down to
remove the mounting bracket as shown below:
1
5
Mounting the Indoor Chime
Slide down
Mark and drill the appropriate holes in the wall for the
mounting bracket.
Snap the provided level onto the
mounting bracket and align the bracket against the wall
where you would like to install your chime. Make sure that
the hole in the bracket lines up with the 0.8 inch hole that
you drilled in the first part of the installation. Using the
bracket as a guide, mark the wall with the four
corresponding holes for screws. Remove the mounting
bracket from the wall and detach the level. Drill four holes
slightly smaller than the wall anchors using the provided
drill bit.
2