37
OPERATION
OVERFLOWING WARNING
If the dishwasher intakes too much water or there are leaks, the dishwasher will
detect this and “F1” will flash on the display. As long as overflowing continues, the
dishwasher's overflow protector will remain active. If overflowing stops and safety is
assured, “F1” will disappear. If “F1” does not disappear, there is a permanent fault.
In this case, an authorized service provider should be contacted.
MAINTENANCE AND CLEANING
WARNING
WARNING
: Before cleaning or carrying out maintenance, switch off the
appliance, disconnect the main plug, and turn off the water tap.
The dishwasher should only be repaired by an authorized service agent. Do not try to
repair the dishwasher beyond Troubleshooting recommendations in this manual.
WARNING
WARNING
: All surfaces are susceptible to scratching. Contact with
unsuitable cleaning agents can alter or discolor all surfaces.
WARNING
WARNING
: Keep the floor around the dishwasher clean and dry to
prevent any possible injury. Keep the dishwasher clean and empty and
the door cracked open to allow air to circulate in case of any
extended unused time.
• The dishwasher door can be damaged by abrasive cleaners, scouring pads,
and abrasive cloths. Cleaning the dishwasher in regular intervals prolongs the
dishwasher’s service life.
• Unplug the dishwasher and turn off its tap before starting any cleaning.
• Do not use any cleaning supplies that contain metals or any type of abrasives
when cleaning the dishwasher. Wipe with a fine cleaning material and a
dampened cloth.
37
End of Pr
ogr
am
