8
Initial Use
RECOMMENDATIONS FOR THE REFRIGERATOR COMPARTMENT
• Make sure that the food does not touch the temperature sensor in the refrigerator
compartment. To allow the refrigerator to maintain its ideal storage temperature, the sensor
must not be hindered by food.
• Do not place hot foods or liquids inside the refrigerator.
INITIAL USE
• Before using the product, make sure that all preparations have been made in accordance
with the instructions provided in the built-in refrigerator installation manual.
• Clean the interior of the refrigerator as recommended in the "Maintenance and Cleaning"
section of this manual (page 23). Before plugging in the refrigerator for the first time,
make sure that the interior is dry.
• Plug the refrigerator into a grounded socket. The interior becomes illuminated when the
door of the refrigerator is opened.
• Plug the unit in for a minimum of 6 hours without placing any food in it and do not open the
door unless it is necessary.
ATTENTION
You will hear a noise when the compressor starts up. The liquids and gases
sealed within the cooling system may also create noise even if the compressor
is not running; this is quite normal.
ATTENTION
Front edges of the refrigerator may feel warm. This is normal. These areas are
designed to be warm to avoid condensation.
• Take necessary measures against risk of freezing in the unit's water hoses.
• The water temperature operating range must be 33 °F (0.6 °C) minimum and 100 °F
(38 °C) maximum.
WARNING
Never connect the product to a cold water main with a pressure of 80 psi (5.5
Bars) and above.
IMPORTANT SAFETY INSTRUCTIONS