15
Label all wires prior to disconnecting when servicing controls. Wiring errors can cause
improper and dangerous operation. Verify proper operation after servicing. Only a qualified
electrician or professional may conduct electrical service on this unit.
Check your local code for which of the following options may be used in grounding the
receptacle power supply connections. Only a qualified electrician or professional can carry
out these grounding options.
NOTE:
Any improper electrical wiring service performed on this unit by the customer and/
or installer will void the warranty.
OPTION 1 - FOUR-WIRES CONNECTION:
1. Connect the LI receptacle terminal to the incoming BLACK electrical supply wire
(Ll-hot wire).
2. Connect the L2 receptacle terminal to the incoming RED electrical supply wire (L2-hot wire).
3. Connect the NEUTRAL receptacle terminal to the incoming NEUTRAL (WHITE) electrical
supply wire.
4. Connect the GROUND receptacle terminal to the incoming GROUND (GREEN)
electrical supply wire.
OPTION 2 - THREE-WIRES CONNECTION: (THIS OPTION IS ONLY AVAILABLE IN
THE UNITED STATES)
1. Connect the LI receptacle terminal to the incoming BLACK electrical supply wire
(Ll-hot wire).
2. Connect the L2 receptacle terminal to the incoming RED electrical supply wire (L2-hot wire).
3. Connect the NEUTRAL with the GROUND receptacle terminal to the incoming NEUTRAL
(WHITE) electrical supply wire.
• DO NOT USE EXTENSION CORDS WITH THIS APPLIANCE AS IT MAY RESULT IN
FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY.
• The appliance is equipped at the factory with a four-wire electric supply cord with ring
terminals (LI, L2, N, Ground) suitable for range use UL/CSA listed type SRDT/DRT
4x6AWG (LI, L2, N, G) rated 300V, 50A with fused plug type NEMA 14-50P; cable
length is 60" (1524 mm).
• If the supply cord set must be replaced, it must be replaced with an identical set having
the same technical specifications.
INSTALLATION
Pow
er Rating & Electrical Connection