17
Changing Handle
INSTALLATION
STEP 7 - COMPLETE INSTALLATION
1. Check that all parts are now installed. If there is an extra part, go back through the steps to
see which step was skipped.
2. Dispose of/recycle all packaging materials.
3. Check operation of oven:
• Turn on power.
• Press Broil.
• Set the temperature.
• Press Start.
NOTE:
If oven(s) does not operate, check the following:
• Household fuse is intact and tight; or circuit breaker has not tripped.
• Electrical supply is connected.
• See the “Troubleshooting” section at the end of this manual.
Scan to view the User Manual.
4. After the oven has been on for 5 minutes, feel for heat. If you do not feel heat or if an error
message appears in the display, turn off the oven and contact a qualified technician.
5. Press Cancel to turn off the oven.
CHANGING HANDLE
To remove handle on the oven door, remove the screw and pull hand outward.
To install handle:
1. Screw in anchors to the door with a Phillips-head screwdriver.
2. Line up and fit the handle into the top and bottom door anchors.
3. Using an Allen/hex wrench, secure the top and bottom handle screws to the door
anchors.
