X-Ray Inspection System
User Manual
P a g e
| 2
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
ZKTeco offers no warranty, guarantee or representation regarding the completeness of
any information contained in this manual or any of the amendments made thereto.
ZKTeco does not extend the warranty of any kind, including, without limitation, any
warranty of design, merchantability or fitness for a particular purpose.
ZKTeco does not assume responsibility for any errors or omissions in the information or
documents which are referenced by or linked to this manual. The entire risk as to the
results and performance obtained from using the information is assumed by the user.
ZKTeco in no event shall be liable to the user or any third party for any incidental,
consequential, indirect, special, or exemplary damages, including, without limitation,
loss of business, loss of profits, business interruption, loss of business information or any
pecuniary loss, arising out of, in connection with, or relating to the use of the information
contained in or referenced by this manual, even if ZKTeco has been advised of the
possibility of such damages.
This manual and the information contained therein may include technical, other
inaccuracies or typographical errors. ZKTeco periodically changes the information herein
which will be incorporated into new additions/amendments to the manual. ZKTeco
reserves the right to add, delete, amend or modify the information contained in the
manual from time to time in the form of circulars, letters, notes, etc. for better operation
and safety of the machine/unit/equipment. The said additions or amendments are
meant for improvement /better operations of the machine/unit/equipment and such
amendments shall not give any right to claim any compensation or damages under any
circumstances.
ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment
malfunctions due to any non-compliance of the instructions contained in this manual (ii)
in case of operation of the machine/unit/equipment beyond the rate limits (iii) in case of
operation of the machine and equipment in conditions different from the prescribed
conditions of the manual.
The product will be updated from time to time without prior notice. The latest operation
procedures and relevant documents are available on
If there is any issue related to the product, please contact us.
