ZKRF10M&ZKRF20M
User Manual
P a g e
| 17
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
4
Installation Setup
Preparation before Installation
1.
Before fixing the EAS product, it is necessary to test the environment of the installation location. When
installing the device, the distance should be as far away as possible from the following environments:
walls full of antennas, high-voltage lines, spotlights, large-area metal objects, etc.
2.
After the device is powered on, place it in the desired location.
3.
Observe the status of the signal indicator on the receiving motherboard. If any of the indicators here
are off, it means that the working environment is very good and can be installed.
4.
It takes about 30 minutes to test the working status of different labels in this working environment.
5.
After determining the installation location and installation distance, install the product securely.
Product Installation Instructions
4.2.1
Single Detection Channel Working Mode
Here is a single-detection channel operating mode consisting of a transmitting unit and a receiving unit.
ZKRF10M Installation Diagram
