VR10 Pro
User Manual
P a g e
| 24
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
(d)
Wait for 3S after the boom is completely stabilized, use the barrier remote control to raise and lower it
repeatedly for about three minutes until the green light is always on, indicating that the
environmental record is complete;
(e)
The radar can be used after power off and restart.
Note:
During background learning, ensure that there are no movable targets (vehicles, people) other than
the fixed environment within the radar detection range.
10
FAQ
Problem:
After installation, the green light of the radar is always on, and the boom does not fall.
Possible cause: The Newly added strong reflector in the radar detection range needs to be moved out
of the radar field of view or re-learned for background learning.
Problem:
The person is standing in front of the radar and the green light is not on.
Possible cause: The radar starts to detect the difference between people and vehicles after the car
triggers the radar light.
Problem:
The red light of radar flashes when the 12V power supplied by the gate control board is on.
Possible cause: It is recommended to connect an external 12V-1A power adapter.
11
Packing List
Number
Accessories
Quantity
1
VR10 Pro Radar
1
2
M16 Nut
1
3
Gasket
1
4
Rubber Waterproof Ring
1
5
Wiring Harness
1
6
User Manual
1
