1
Chapter 1 Application
The TSP-4 card capture reader (hereinafter
–
the card capture reader) is designed to operate
within ZKTeco’ s ZKBioSecurity 3.0 system as a device for reading, capturing and keeping
proximity cards issued to visitors and meant for return at exit (hereinafter
–
guest cards). It
allows you to withdraw cards.
The card capture reader should work in conjunction with card reader, ACCESS-controller and
blocking device (OD: turnstile, swing gate, door lock, etc.). The card reader is installed inside of
the card reader; selection, purchase and installation of the reader is performed directly by the
customer (installer).
When used in ZKTeco’s access control systems, the data is transferred via Wiegand interface
from built-in reader of the card capture reader to the ZKTeco’s ACCESS-controller. The ability to
operate the card reader is supported by the C3-200 and InBi0-260 controllers.
Also the card capture reader can work with third-party controllers. In this case, transmission of
data from the reader of the card capture reader to the controller is done via Wiegand interface
(interface type depends on equipment that is used in ACS).
To ensure quick and easy passage of people it is recommended to install one card capture
reader together with an OD for every 500 people.
Informal version, for reference only
Informal version, for reference only
Informal version, for reference only
Informal version, for reference only
Informal version, for reference only
Informal version, for reference only
