ZKTeco TS2000 Pro Series Скачать руководство пользователя страница 2

TS2000 Pro Series Tripod Turnstile

 

 

      

      

User Manual 

P a g e

 | 1 

 

Copyright©2021 ZKTECO CO., LTD.  All rights reserved. 

Copyright © 2021 ZKTECO CO., LTD. All rights reserved.

 

Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any 
way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or 
"ZKTeco"). 

Trademark 

  is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned by 

their respective owners. 

Disclaimer 

This  manual  contains  information  on  the  operation  and  maintenance  of  the  ZKTeco  equipment.  The 
copyright in all the documents, drawings, etc. in relation to the ZKTeco supplied equipment vests in and is 
the property of ZKTeco. The contents hereof should not be used or shared by the receiver with any third 
party without express written permission of ZKTeco. 

The contents of this manual must be read as a whole before starting the operation and maintenance of the 
supplied equipment. If any of the content(s) of the manual seems unclear or incomplete, please contact 
ZKTeco before starting the operation and maintenance of the said equipment.  

It  is  an  essential  pre-requisite  for  the  satisfactory  operation  and  maintenance  that  the  operating  and 
maintenance  personnel  are  fully  familiar  with  the  design  and  that  the  said  personnel  have  received 
thorough training in operating and maintaining the machine/unit/equipment. It is further essential for the 
safe  operation  of  the  machine/unit/equipment  that  personnel  has  read,  understood  and  followed  the 
safety instructions contained in the manual. 

In  case  of  any  conflict  between  terms  and  conditions  of  this  manual  and  the  contract  specifications, 
drawings, instruction sheets or any other contract-related documents, the contract conditions/documents 
shall prevail. The contract specific conditions/documents shall apply in priority. 

ZKTeco  offers no warranty, guarantee or representation regarding the completeness of any information 
contained in this manual or any of the amendments made thereto. ZKTeco does not extend the warranty 
of any kind, including, without limitation, any warranty of design, merchantability or fitness for a particular 
purpose. 

ZKTeco does not assume responsibility for any errors or omissions in the information or documents which 
are referenced by or linked to this manual. The entire risk as to the results and performance obtained from 
using the information is assumed by the user. 

ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, 
special,  or  exemplary  damages,  including,  without  limitation,  loss  of  business,  loss  of  profits,  business 
interruption,  loss  of  business  information  or  any  pecuniary  loss,  arising  out  of,  in  connection  with,  or 

Содержание TS2000 Pro Series



















Отзывы: