L
Ethernet and Cloud Server Settings
Tap on [
M/OK
] > [
COMM.
] > [
Ethernet
]
to set the network parameters. If the TCP/IP
communication of the device is successful, the icon
will be displayed in the
upper right corner of the standby interface.
Tap on
[
M/OK
] > [
COMM.
] > [
Cloud Server Settings
] to set the server address and
server port, example, the IP address and port number of the server after the software is
installed. If the device communicates with the server successfully, the icon will be
displayed in the upper right corner of the standby interface.
Note:
While pairing the device with ZKBio Access IVS / ZKBioTime8.0 software.
Server Address:
Set as the IP address of the ZKBio Access IVS / ZKBioTime8.0 server.
Server Port:
Set as the service port of ZKBio Access IVS / ZKBioTime8.0.
10
