3 Preparation
Below is the outline and dimensions of SBTL9000:
2
Figure 3-1
Tools:
A measuring tape, an adjustable wrench, an impact drill and a small screwdriver (included in
the package).
1.
2.
3.
The power and signal wires should be set separately to easily distinguish strong and weak power.
Please invite professional personnel to complete the wiring. The device must be connected to the
ground.
4.
Thread the connection wire of the device through the tube before assembly.
Material:
A PVC anti-€re and insulation tube (diameter∫ 25mm), standard three-core power
extension wire, tether cable (random con€guration), M12 expansion screws (included in the
package).
1080
271
1184
780
