ProFace X (DS)
User Manual
P a g e
| 78
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
The
Door-unlock combination 2
is set as (
02 02 04 04 07
), indicating that the unlock
combination 2 consists of 5 people; the first two are from AC group 2, the next two are from AC
group 4, and the last person is from AC group 7.
The
Door-unlock combination 3
is set as (
09 09 09 09 09
), indicating that there are 5 people in
this combination; all of which are from AC group 9.
The
Door-unlock combination 4
is set as (
03 05 08 00 00
), indicating that the unlock
combination 4 consists of only three people. The first person is from AC group 3, the second
person is from AC group 5, and the third person is from AC group 8.
Note:
To delete the door-unlock combination, set all the Door-unlock combinations to 0.
Anti-Passback Setup
11.5
A user may be followed by some person(s) to enter the door without verification, resulting in a security
breach. So, to avoid such situations, the Anti-Passback option was developed. Once it is enabled, the
check-in and check-out record must occur alternatively to open the door to represent a consistent pattern.
This function requires two devices to work together:
One device is installed on the indoor side of the door (master device), and the other one is installed on the
outdoor side of the door (the slave device). The two devices communicate via the Wiegand signal. The
Wiegand format and Output type (User ID / Card Number) adopted by the master device and slave device
must be consistent.
Tap
Anti-Passback Setup
on the
Access Control
interface.
