ProFace X Series
User Manual
P a g e
| 35
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Menu Name
Description
IP Address
The factory default value is 192.168.1.201. Please set the value according to
the actual network situation.
Subnet Mask
The factory default value is 255.255.255.0. Please set the value according to
the actual network situation.
Gateway
The factory default address is 0.0.0.0. Please set the value according to the
actual network situation.
DNS
The factory default address is 0.0.0.0. Please set the value according to the
actual network situation.
TCP COMM. Port
The factory default value is 4370. Please set the value according to the actual
network situation.
DHCP
Dynamic Host Configuration Protocol, which is to dynamically allocate IP
addresses for clients via server.
Display in Status Bar
To set whether to display the network icon on the status bar.
PC Connection
To improve the security of data, please set a Comm Key for communication between the device and the
PC.
If a Comm Key is set, this connection password must be entered before the device can be connected to
the PC software.
Click
PC Connection
on the Comm. Settings interface.
Menu Name
Description
Comm Key
Comm Key: The default password is 0, which can be changed. The Comm Key
may contain1 to 6 digits.
Device ID
Identity number of the device, which ranges between 1 and 254. If the
communication method is RS232/RS485, you need to input this device ID in the
software communication interface.
