12
Device Operation
ADMS Settings
Press to enter the main menu and press to select Comm. > ADMS, to set the parameters which are
used for connecting with the ADMS server.
When the Webserver is connected successfully, the initial interface will display the logo.
Server Address:
Enter IP address of ADMS server (namely, IP address of server where software is installed).
Server Port:
Enter Port number used by the ADMS server.
Enable Proxy Server:
Method of enabling proxy. To enable proxy, please set the IP address and port number
of the proxy server. Entering proxy IP and server address will be the same.
Note:
To connect the device to ZKBioSecurity software, Ethernet and ADMS options must be set correctly.
Access Control Settings
Press to enter the main menu and press and to select Access Control.
To gain access, the registered user must meet the following conditions:
1.
User's access time falls within either user's personal time zone or group time zone.
2.
User's group must be in the access combo (when there are other groups in the same access combo,
verification of members of those groups are also required to unlock the door).
Access Control Options:
To set parameters of the lock and other related devices.
Time Rule Setting:
To set a maximum of 50 time rules. Each time rule consists of 10 spaces (7 spaces for one
week and 3 holiday spaces), each space consists of 3 time periods.
Holidays:
To set dates of holiday and the access control time zone for that holiday.
Combined Verification:
To set access control combinations. A combination consists of a maximum of 5
access control groups.
Anti-Passback Setup:
To prevent passing back which causes risks to security. Once it is enabled, entry and
exit records must be matched in order to open door. In Anti-Passback, Out Anti-
Passback and In / Out Anti-Passback functions are available.
