Ethernet and Cloud Server Settings
Access Control Settings
13
Eg: 192.168.
.163
163
Eg: 192.168.
.1
163
Eg: 10 80 38 74
1
.
.
.
Eg: 6609
Device Operation
3. Click
and fill in all the required fields to register a new user
in the software.
[Personnel] > [Person] > [New]
For more details, please refer the ZKBioSecurity User Manual.
4. Click
to synchronize
all the data to the device including the new users.
[Access] > [Device] > [Control] > [Synchronize All Data to Devices]
2. Click
in the operation column, a new window will pop-up. Select the Icon type, Area,
and Add to Level from each drop-down and click
to add the device.
[Add]
[OK]
Click on
to set the Server Address and Server Port, the IP
Address and Port Number of the server after the software is installed. If the device communicates with
theServersuccessfully,theicon
willbedisplayedintheupperrightcornerofthestandbyinterface.
> [COMM.] > [Cloud Server Setting]
Click on
to set the network parameters. If theTCP/IP communication of the
deviceissuccessful,theicon
willbedisplayedintheupperrightcornerofthestandbyinterface.
> [COMM.] > [Ethernet]
Click on
to enter the access control management interface and set the
relevant parameters of the access control.
> [Access Control]
