MA300
User Manual
P a g e
| 20
Copyright©2023 ZKTECO CO., LTD. All rights reserved
d.
The system automatically returns to the verification state when
both 10 fingers and card are enrolled, the management card is
swiped once or the operation times out.
3.
If you are already assigned with an ID, then there are the following two
cases for you to enroll your fingerprint(s) or card:
(1)
Enroll fingerprint(s) when you have already enrolled card
a.
After you swipe the enrolled card, the system will generate the
voice prompt “
: User number **. Register. Please press your
finger” (** refers to the ID assigned to you; same below) and
enter the fingerprint enrollment state. Your enrolled fingerprints
will overwrite all previous fingerprints.
b.
Press the same finger over the sensor three times following the
voice prompts by adopting the proper fingerprint placement. If
fingerprint enrollment succeeds, the system generates the voice
prompt “
: Registration is successful. Please press your finger”
and gets ready for enrollment of the next fingerprint.
c.
The system automatically returns to the verification state when
10 fingers are enrolled, the management card is swiped once or
the operation times out.
Tips:
The fingerprint(s) enrolled in this step will overwrite all your previously
enrolled fingerprints.
In this mode, the fingerprint of the user who bears the management card
cannot be enrolled because swiping the management card will return
the system to the verification state automatically.
