IN710
User Manual
P a g e
| 40
Copyright © 2023 ZKTECO CO., LTD. All rights reserved.
Fingerprint
8.3
Tap
Fingerprint
on the
System
interface to set the Fingerprint.
Function Name
Description
1:1 Threshold Value
Under 1:1 verification method, the verification will only be successful
when the similarity between the acquired fingerprint data and the
fingerprint template associated with the entered user ID enrolled in the
device is greater than the set value.
1:N Threshold Value
Under 1:N verification method, the verification will only be successful
when the similarity between the acquired fingerprint data and the
fingerprint templates enrolled in the device is greater than the set
value.
FP Sensor Sensitivity
To set the sensibility of fingerprint acquisition. It is recommended to
use the default level "
Medium
". When the environment is dry, resulting
in slow fingerprint detection, you can set the level to "
High
" to raise the
sensibility; when the environment is humid, making it hard to identify
the fingerprint, you can set the level to "
Low
".
1:1 Retry Attempts
In 1:1 Verification, users might forget the registered fingerprint, or press
the finger improperly. To reduce the process of re-entering user ID, retry
is allowed.
Fingerprint Image
To set whether to display the fingerprint image on the screen during
fingerprint enrollment or verification. Four choices are available:
Show for Enroll:
To display the fingerprint image on the screen only
during enrollment.
Show for Match:
To display the fingerprint image on the screen only
during verification.
Always Show:
To display the fingerprint image on screen during
enrollment and verification.
None:
Not to display the fingerprint image.
