ZKTeco FR1200 User Manual V1.0.1
4
Dip Switch
Wiring Terminal
Reset Button
Operation succeeds:
The green indicator is solid on for one second, at the
same time the speaker play one long beep.
Operation failed:
The red indicator is solid on for one second, at the same
time the speaker play two short beep.
Verification state:
The green LED blinks once every two second, the beeper
with no sound.
²
Card Sensor Area:
Refers to the area in the red dashedline as shown in the
figure above.
²
Fingerprint Sensor:
Used to enroll and match fingerprints.
Bottom view:
²
Reset Button:
Used to restart the reader.
Back view:
Dip Switch:
14 switches are used to set the RS485 communication address (device
ID). Number 5 switch is idle. And the number 6 switch is used to set the terminal
