2
How to disassemble the base?
Step 1:
Take out the base from its carton.
Step 2:
Unscrew the four adjusting screws from the bottom of the base by your
hand.
Step 3:
Remove the base plate from the bottom of the base.
Adjusting screw
Base plate
Base
Mounting hole
Fixing hole
Mounting hole:
It is used to install the mounting bracket of the device. It can also
be used as a wiring hole.
Fixing hole:
Used for fixing the mounting bracket of the equipment.
Adjusting screw:
It is used to adjust the balance of the equipment.