ZKTeco C9AP Series, Быстрый старт

Страница: 9 / 32

8
Installation Steps of European/Australian
Standard
Central
Screw Cap
Central
Screw
Installation Diagram - EU/AUS
Note: The existing wires are required to install the camera.
Step 1: Remove the Existing Floodlight
Turn off the power at circuit breaker or fuse box. 1.
Check with an electric tester to make sure that the power is switched off
before the installation.
2.
Remove the existing floodlight and pull it out from the wall to reveal the wires. 3.
Step 2: Install the Junction Box
Drill two holes in the wall according to the hole positions of the junction
box, and then insert the plastic anchor into the holes. Anchors are
necessary for walls that are made of hard materials such as concrete, brick
or stucco.
1.
Fix the junction box on the wall with the proper provided screws.
2.
1
Lock Collar
Adjustment Knob
Dust Pad
Mounting
Screws
Mounting
Anchors
Yellow & Green:
Ground Wire (E)
Blue: Neutral
Wire (N)
Brown: Live
Wire (L)
Junction Box
2