manualshive.com logo in svg

ZKTeco Atlas x60 Series, Руководство по установке, Страница: 5 / 49

Поделиться
Скачать
ZKTeco Atlas x60 Series Скачать руководство пользователя страница 5

5

Atlas x60 Series Access Control Panels Installation Guide

Safety Precautions

The following precautions are to keep user’s safe and prevent any damage. 

Please read carefully before installation.

Do not

 expose to direct sunlight, water, dust and soot.

Do not

 place any magnetic objects near the product. 

Magnetic objects such as magnets, CRT, T V, monitors or 
speakers may damage the device

Do not

 place the device next to heating equipment.

Prevent 

water, drinks or chemicals leaking into the device.

This product is not intended for use by children unless they 
are supervised.

Do not

 drop or damage the device.

Do not

 disassemble, repair or modify the device.

Do not

 use the device for any purpose other than those 

specified.

Remove

 dust or dirt regularly. While cleaning, wipe dust off 

with a smooth cloth or towel instead of water.

Contact

 your supplier in case of any problem!

Содержание Atlas x60 Series


















































Отзывы:

Нет отзывов