Troubleshooting
Fingerprint can not be read or it takes too long.
Check whether a finger or fingerprint sensor is stained with sweat, water, or dust
Retry after wiping off finger and fingerprint sensor with dry paper tissue or a mildly wet cloth.
If a fingerprint is way too dry, blow on the finger and retry.
Fingerprint is verified but authorization keeps failing.
Check whether the user is restricted by door zone or time zone.
Check with administrator whether the enrolled fingerprint has been deleted from the
device for some reason.
Authorized but door does not open.
Check whether the lock duration is set to appropriate minutes which opens the lock.
Check whether anti-passback mode is in use. In anti-passback mode, only the person who
has entered through that door can exit.
Why device display “system broken“ and the alarm is ringing.
Check whether the device and back plate are securely connected to each other. If not, a
tamper switch is activated which triggers the alarm and keeps it ringing.
How to set F18 used as fingerprint reader on Inbio access controller.
Please contact our technical support department
28
Содержание F18
