ZK Technology iClock 2500, Руководство пользователя

Страница: 56 / 96

iClock_ v6.1
12
4 Communication setting
If when the data is transferred between the equipment and PC, it is
necessary to set the equipment communication parameter according
to the transmission cable. When the equipment and the machine are
in the communication, the "in the work... ...
”
Message will be
displayed on the equipment, Please Do not operate the equipment
while the test is running.
Note: please inspect the setting here before the machines communicate
with the computer, the parameter must be consistent with the one on the
communication option in the software
.
To find sitting on the fingerprint machine if you are using Ethernet
communication, following sitting:
Machine IP address : Default IP is 192.168.1.201, you must
change it; Do not set IP as same as the IP of PC that the fingerprint
machine connect with.
Subnet mask: Default mask 255.255.255.0, you must change it.
Gateway address : the Default gateway address is 0.0.0.0, if the
equipment and PC is not in the identical network segment, set up
the gateway address firstly.
Network speed: The network run speed, there are three kinds of
options, automatic adoption, 10M, the 100M. Set network speed
according to your equipment that is plugged into a locate area
network using Ethernet cable.