Charging
Plug the charging cable into the speaker’s charging port with the included cable.
The device will automatically begin charging once the adapter is connected to the unit. The
unit will also power on when connected to a power source even if the battery power is low.
When the battery is full, the charging indicator light on the front panel will turn off.
The device takes approximately 5 hours to fully charge. With standard usage, a fully charged
battery can play for about 2 hours.
TWS:
Turn on Bluetooth
®
mode, then press and hold the
TWS
button to enter TWS function. Once
confirmed, link two
ZIZO Ampify
speakers together with the same bluetooth device.
Press and hold the
TWS
button again to cancel TWS funtion.
FM Function:
1. Choose”Mode” to switch to FM radio.
2. Choose”PLAY/PAUSE” for automatic searching and saving.
3. Choose”PREV” and “NEXT” to switch channels.
Microphone:
1. Plug in your microphone into the microphone jack on unit main control panel.
2. Use the “ECHO” knob to control microphone echo.
AUX:
1. Press the audio input on unit on main panel on the top.
2. Insert the Aux cable plug into the Aux input, then connect with your device.
3. Pull out the cable when finished listening.
Power ON / OFF
1. To turn on speakers, press the power button on.
2. To turn off, press the power button off.
Bluetooth
®
Pairing
1. When using the Bluetooth, please tap settings, then open”Bluetooth”.
2. Scan from your phone, tablet, notebook for AMPLIFY, and pair the device to the speaker,
turn on your music in the device, then you can listen audio files through the speaker.
3. Unpair from speaker when finished listening.
GETTING STARTED
USING YOUR DEVICE
Ensure the speaker is fully charged before using for the first time.
