4
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а
1b
1c
3
2
Folding Hook
13
Your travel cot, including side rails and bottom pad, must be fully assembled prior to
use:
· Top and side rails must be completely latched.
· The folding mechanism on the center of the bottom of the cot must be locked.
· Mattress must be flat and secured by velcro.
TO AVOID SUFFOCATION, DO NOT use extra padding such as a water mattress,
mattress or pillows inside the travel cot.
To protect your child from falls and other injuries:
•
Always use on a flat level floor.
•
Keep away from trailing cords, flexes and lamps.
•
When folding the travel cot do not force on the side rails. Repeat the folding
operations. When folded, store away from children.
•
Do not allow other children to play unsupervised in the vicinity of the travel cot.
Safety tips and warnings for changing table:
•
WARNING: Do not leave the child unattended.
•
All assembly fittings shall always be correctly tightened and checked regularly.
•
Be aware of the risk of open fires and other sources of strong heat, such as electric bar
fires, gas fires, etc. in the near vicinity of the changing unit.
•
Use only additional parts or replacements supplied by the manufacturer or retailer.
Do not use the changing table if any part is broken, torn or missing.
ATTENTION! Changing table for children from birth up to 12 months and weight to
11kgs.
COMPLIANCE WITH STANDARD
EN 716-1:2017+AC:2019 & EN 716-2:2017.
