ZIV SW3-L3 страница 70 Скачать руководство пользователя

Страница: 70 / 180

SW3-L3

GIGABIT/FAST ETHERNET SWITCH/ROUTER TYPE SW3-L3

70/180

USER GUIDE - M0SW3M1902Iv07 - V06 February 2019

•

Mess num Fast.

It sets the number of LLDP messages that will be sent during a

high-speed transmission. 4 is the default value and recommended. Valid values are 1

to 8.

•

Tx Notif. Enable.

Indicates to the LLDP agent whether SNMP (traps) notifications

must be sent when changes occur in the remote information received in the interface.

In order for SNMP notifications to be effectively sent, they must be explicitly

allowed to be sent in the SNMP menu.

•

PortDesc.

Indicates to the LLDP agent whether or not to include the optional field

with the descriptive information of the interface in the LLDP messages sent. The

value of the field is the text of the

Description

parameter of the

Port

menu (see

5.3.1).

•

SysName.

Indicates to the LLDP agent whether or not to include the optional field

with the name of the device in the LLDP messages sent. The value of the field is the

text of the

Hostname

parameter of the main menu (see 5.1.1).

•

SysDesc.

Indicates to the LLDP agent whether or not to include the optional field

with the description of the device in the LLDP messages sent. The value of the

parameter is obtained automatically from the running firmware, so it is not subject to

changes by the user.

•

SysCap.

Indicates to the LLDP agent whether or not to include the optional field with

the device capabilities in the LLDP messages sent. The coding of the field is set in

the standard and it is made up of flags. The value is automatically inserted.

•

Tx Mgmt.

Indicates to the LLDP agent whether or not to include the optional field

with the management address of the device in the LLDP messages sent. The value

to be sent is set by the

Mgmt Address

parameter.

•

Mgmt Address.

It allows the user to set the value of the optional field that reports

the management address of the device.

The protocol has its own statistics that show the data specific to the execution of the

protocol in each interface as part of the information received.

Содержание SW3-L3





















































































































































































Результаты поиска

Содержание SW3-L3

Отзывы:

Похожие инструкции для SW3-L3

Бренды по названию

Популярные бренды

ZIV SW3-L3, Руководство пользователя

Результаты поиска

Содержание SW3-L3

Отзывы:

Похожие инструкции для SW3-L3

Бренды по названию

Популярные бренды