ZIV F2MUX Скачать руководство пользователя страница 24

Страница: 24 / 28

F2MUX

FAMILY OF CONVERTER DEVICES TYPE F2MUX

24/28

USER GUIDE - Rev. V00 (June 2021)

INTERNAL SETTINGS

The internal settings available in the interfaces are described in FIGURE 13 (INTF1

interface) and FIGURE 14 (INTF2 interface).

4.1

INTF1 INTERFACE

In the INTF1 interface, it is necessary to configure the operating mode.

The use of the C37.94 standard with frame timeslots is set at the factory. The frame itself

contains information about the number of timeslots used.

The FM0 / CMI mode at 64 kbit/s can operate with any type of INTF2 interface. For

G.703 at 2 Mbit/s occupies 1 slot of the frame of 2 Mbit/s of INTF2.

The FM0 / CMI mode at 128 kbit/s only operates with INTF2 G.703 at 2 Mbit/s. It

occupies 2 slots of the frame of 2 Mbit/s of INTF2.

The FM0 / CMI mode at 512 kbit/s only operates with INTF2 G.703 at 2 Mbit/s. It

occupies 8 slots of the frame of 2 Mbit/s of INTF2.

The FM0 / CMI mode at 2048 kbit/s only operates with unframed INTF2 G.703 at

2 Mbit/s.

4.2

INTF2 INTERFACE

In the INTF2 interface, for the G.703 at 2 Mbit/s interface, it is necessary to configure the

type of connector to use between: two unbalanced BNC connectors (75

Ω) or a balanced

RJ-45 connector (120

Ω) for twisted pair.

The use of the two unbalanced BNC connectors (75

Ω) is set at the factory.

When the INTF2 interface operates in C37.94 mode, the number of channels used by

the C37.94 standard will automatically adapt to the data rate selected on the INTF1

interface. Therefore, due to the inherent limitation of the C37.94 standard, transmission

rates above 768 kbit/s cannot be used on the INTF1 interface.

Содержание F2MUX





























Результаты поиска

Содержание F2MUX

Отзывы:

Бренды по названию

Популярные бренды

ZIV F2MUX, Руководство пользователя

Результаты поиска

Содержание F2MUX

Отзывы:

Бренды по названию

Популярные бренды