Zitzi DELFI PRO, Руководство пользователя

Страница: 29 / 40

User manual
29
Zitzi Delfi Pro
Footrest high edge, single stay
A
C
D
B
E
F
G
H
I
A
C
D
B
E
F
G
H
I
Mounting the high edge footrest with single stay at after ordering
Replace existing foot plate with the supplied. Since that high edge footrest is designed to
suit both single and double stay, the footrest needs alternative drilling depending on the
type of foot plate you have.
To mount the high edge footrest start by pushing the rim pin (A) on the footrest (B) into the
footrest stay (C). Then set the footrest (D) at the desired height and tighten the lever knob (E).
Set the desired height and width of the footrest using the screws (F) and (G). The plastic
stay (H) on the footrest shall be brought through the track (I) on the footrest stay. Finally,
install the supplied upholstery and check that all screws are tightened.
Mounting the high edge footrest with single stay when ordering with footrest
To mount the high edge footrest start by pushing the rim pin (A) on the footrest (B) into the
footrest stay (C). Then set the footrest (D) at the desired height and tighten the lever knob (E).
Set the desired height and width of the footrest using the screws (F) and (G). The plastic
stay (H) on the footrest shall be brought through the track (I) on the footrest stay. Finally,
install the supplied upholstery and check that all screws are tightened.
The plastic stay (H) may after adjustment of desired height be cut or heated in under the
footrest plate according to personal preference.
Drillhole markings can also be found under the foot plate.
!
!