Ziton ZR4ST-3, Руководство пользователя

Страница: 19 / 23

SURVE
YOR
DE
VICE
LOC
AL - REM
OTE
PASS / F
AIL
SIGNAL QU
ALIT
Y %
REM
OTE - L
OC
AL
BA
TT
ER
Y
>31dB >31dB Pass
100% 98% 0001
SURVEYOR
DEVICE
LOCAL - REMOTE PASS / FAIL
SIGNAL QUALITY %
REMOTE - LOCAL
BATTERY
Setting up comms
Surveyor Vxx.xx
CH 1 CH 2 CH 1 CH 2
RSSI/dB
START
LOCAL - REMOTE
Step By Step Guide - Ziton Hub/RCC to RCC Surveying
Surveyor
in Hub
position
Step 1.
Position the Signal Surveyor in the proposed Radio Hub
location.
Step 2.
Turn on the Signal Surveyor.
Step 3.
Record the background level displayed, for future reference.
Refer to the Using the Signal Surveyor section for more
information.
Step 4.
Turn on the Device Survey Tool.
Step 5.
Position the Device Survey Tool against the wall in the
positions of the proposed RCC position.
Step 6.
Record the signal level.
Step 7.
Repeat Steps 5-6 for all RCC positions as required.
Steps
5 to 6
Note: a Hub/RCC to RCC Survey Form is supplied on page 20.
CH 1 CH 2 CH 1 CH 2
POWER/
CHARGE
TX
RX
RSSI/dB
START
LOCAL - REMOTE REMOTE - LOCAL
Note: the Surveyor Unit can be moved to an identified
RCC location to further expand the coverage. Up to
four hops from an RCC to the Hub can be achieved.
!
©2015 EMS Security Group Ltd. All rights reserved. Page 18 of 24 TSD256 (Iss 6) 26/10/15 AJM www.acornfiresecurity.com
www.acornfiresecurity.com