© 2014 UTC Fire & Security. All rights reserved.
1 / 2
P/N 501-1335ZE-1-06 • REV 06 • ISS 19FEB14
Z600 Series Conventional Detector
Installation Sheet
1
2
Description
Z600 Series Conventional Detector models are shown in
Table 1.
Table 1: Models
Number
Description
EN 54 temperature
classification
Z620-581-3P
Fixed temperature heat
detector,Polar white
Class A (58ºC)
Z620-582-3P
Rate of rise heat detector, Polar
white
Class A1R (58ºC)
Z620-771-3P
High temperature heat detector,
Polar white
Class B (77ºC)
Z630-3P
Optical smoke detector, Polar
white
N/A
Z630-3S30
Optical smoke detector, Polar
white, Chubb
N/A
Figures
Figure 1: Position of the locking tab
Figure 2: Removing a locked detector
Installation
Note:
No wiring is required between the detector and the base.
Refer to base datasheet for line wiring installation. The
installation should be in accordance with the requirements of
the authority having jurisdiction.
The detector attaches to compatible bases with a plug-and-
twist action.
To attach the detector to the mounting base:
1. Align the unit to the base, and then slowly turn until the
location pin on the detector base engages with the slot on
the detector moulding.
