Dokumenten - Nr.: MG_DKA50001
Änderungsindex: 00
Freigabedatum: 07.04.2005
U
U
U
Usssser
er
er
er Manual
Manual
Manual
Manual „„„„Keramikofen 1500“
Keramikofen 1500“
Keramikofen 1500“
Keramikofen 1500“
H:\Bestellblock, Gebrauchsanweisung, Broschüren, Plakate\Instruktionen, Bedienungsanleitungen\Bedienungsanleitung Sinterofen\MG_DKA50001_00
Ofenbedienung - englisch.doc
Seite 2 von 2
To pause the program, press both arrow keys simultaneously: The orange RUN message starts blinking,
the temperature inside the furnace remains at the value indicated. To restart the program, simply press
again both arrow keys simultaneously.
To stop the programme, press both arrow keys simultaneously for more than 1 sec. The orange RUN
message disappears.
3.
3.
3.
3.
Deactivate the
Deactivate the
Deactivate the
Deactivate the furnace
furnace
furnace
furnace
Switch off the furnace in reverse order to the starting method.
4.
4.
4.
4.
Programme
Programme
Programme
Programme
The controller has been coded to reflect the following programs
Programmnummer
Programmnummer
Programmnummer
Programmnummer
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
Final Temperature
[°C]
1500
1500
1500
1500
/
Heating Period [h]
(von RT)
~3h
(~ 8°C/min)
~2h
(~ 12°C/min)
~1,8h
(~ 14°C/min)
~3h
(~ 8°C/min)
/
Dwell Time
2:00:00
2:00:00
1:00:00
2:00:00
/
Cool down Time
not defined
not defined
not defined.
4°C/min
down to
800°C- not
defined
below this
value
/
5.
5.
5.
5.
Advice wh
Advice wh
Advice wh
Advice whe
e
e
en using the furnace
n using the furnace
n using the furnace
n using the furnace::::
-
Lock the furnace door always by using the bolting device
-
Never open the furnace door during operation (Danger of burning, heating rods can be damaged)
-
Do not open the furnace door prior to complete cooling down (wait for message "Timer End" in
the display)
-
Always close the furnace door with caution.
-
When removing a shelf, always use the substitution stopper delivered with the unit.
-
Heating rods and temperature sensors are very sensitive items and consequently have to be
handled with care. I.e. they should never come in contact with the material to be burnt neither
should they be touched directly.
-
Given that this furnace is a high-temperature kiln with a very compact assembly, even the external
walls will heat up (heat radiates especially to the top). Consequently, there is a risk of burning.
