35
□
Boot Other Device
Select “Boot Other Device” Enabled/Disabled.
□
Boot Up NumLock Status
Select <NumLock> key ON/Off when system boot up.
□
Gate A20 Option
Select Gate A20 controlled by Keyboard controller (Normal) or Port 92 (Fast).
□
Typematic Rate Setting
Select “Typematic Rate Setting” Enabled to set,
Typematic Rate (Chars/Sec): Number of characters repeated in one second.
Typematic Delay (Msec): When holding one key, set the time between the first and
second character displayed.
□
Security Option
Setup: Require password to permit BIOS setup utility.
System: Require password to permit boot-up and BIOS setup utility.
□
MPS Version Control For OS
Select MPS (Multiprocessor Specification) Version 1.4 to added extended configuration
tables to improve support for multiple PCI bus configurations and improve future
expandability. It is also required for a secondary PCI bus to work without the need for a
bridge. Select Version 1.1 for older Operating Systems.
□
OS Select For DRAM > 64M
Select “OS2” only if you are running older version of IBM OS/2 Operating System with
greater
than 64MB of RAM on the system. Otherwise select “Non-OS/2” setting.
□
Report No FDD For WIN 95
If running Windows 95/98 without flo
ppy disk drive, select “Enabled” to release IRQ6. This
is required to pass Windows 95/98's SCT test, if
select “Disabled”, BIOS will not report
missing floppy drive to Win95/98.
□
Small Logo(EPA) Show
Select EPA (Environmental Protection Agency) Energy Star logo appears during the
system boot-up process.
Содержание POP-950-D5
