WWW.
ZIPPITY
-OUTDOOR.COM
7
ASSEMBLY
INSTRUCTIONS
1.
Take one of the portable feet and slide the
notched end into the underside of the bottom
rail.
2.
Position the foot so that it is at least 4½”
from the edge of one of the posts. Drive (2) 1½”
Self-Drilling Stainless Steel Screws
(J)
through
the pre-drilled holes in the underside of the
portable foot.
3.
Take the other portable foot and slide the
notched end into the underside of the rail.
4.
Slide the foot until it touches the other post
and drive (1) 1½” self-drilling stainless steel
screw into the pre-drilled hole in the side of the
portable foot.
1.
Take a portable foot and slide the notched
end under the bottom rail. Slide the foot so that
it is touching the side of the post.
2.
Drive one 1½” Self-Drilling Stainless Steel
Screw
(J)
into the pre-drilled hole in the side of
the foot.
3.
Repeat this process on the other side of the
fence panel.
Corner/Angled Application:
In-Line Application:
STEP 4.2A
STEP 4.2B
1
1
2
2
3
3
4
Underside
of fence.
J
J
