WWW.
ZIPPITY
-OUTDOOR.COM
7
ASSEMBLY
INSTRUCTIONS
ZP19049
STEP 4:
INSTALL
HINGE AND LATCH
STEP 4.1
Align the Hinges
(K)
on
the top and bottom gate
rails as shown. Pre-drill
two holes on the face
of each rail. The holes
should be roughly ¼”
from the edge of the
gate rails. Fasten each
hinge with (2) ½” Black
Self-Drilling Stainless
Steel Screws
(N)
.
Align the Latch Finger
(J)
to the top gate rail and
pre-drill four holes into the gate rail as shown. Fasten
(4) ½” black self-drilling stainless steel screws to lock
the latch finger in place.
K
N
STEP 4.2
¼”
J
