WWW.
ZIPPITY
-OUTDOOR.COM
8
ASSEMBLY
INSTRUCTIONS
ZP19024
STEP 6:
INSTALL
SHOWER RODS AND BEAMS
- REQUIRES 2 PEOPLE
Pressure fit the Post Caps
(E)
onto each
Post as shown.
Slide (2) Shower Rods
(L)
into the
smaller routed holes in the Posts until
they hit the back wall of the Posts.
STEP 7.1
STEP 6.1
STEP 7:
INSTALL
POST CAPS
Slide (2) Beams
(I)
into the larger routed holes in the
Posts. Align the pre-drilled holes in the Beams and
Posts and fasten with (16) 1¼” Steel Screws.
STEP 6.2
Apply a small amount of Vinyl Weld Glue
(P)
to the
inside of each Decorative End Cap
(F)
. Attach the
Decorative End Caps to the end of the Beams.
STEP 7.2
L
E
I
Align
side of Beam with
holes faces up
F
P