WWW.
ZIPPITY
-OUTDOOR.COM
8
ASSEMBLY
INSTRUCTIONS
ZP19024
Slide the middle privacy board in
vertically as illustrated.
STEP 5.2
STEP 5.3
Note:
Make sure
the horizontal rail is
inserted fully over
the privacy boards
and rests inside the
rail brackets.
G
STEP 5.4
Insert the first Privacy Board
(G)
into the horizontal
rail then insert the privacy board into the U-channel.
Angle the privacy board as illustrated. This will make
it easier to get the privacy board into the U-channel.
Insert the last privacy board in the same fashion.
1.
Slide another horizontal rail down over the privacy boards.
2.
Secure the horizontal rail to the rail brackets with (4) 3/4” self-drilling stainless steel screws.
3.
Repeat steps 5.1 through 5.4 to assemble the second wall panel.
Open groove
Open groove